Procedure of VDP 5.5 Configuration
Open V center console Login with
administrative rights.
On the file
tab, click > Deploy OVF Template.
If prompted,
allow and install the VMware Client Integration Plug-in.
Select the
source where the vSphere Data Protection Appliance is located
By
default the File name dialog
is
set to OVF Packages (*.ovf). From the drop-down box to the right of File name,
select OVA Packages
(*.ova).
**
Navigate to the location of the vSphere Data Protection Appliance .ova file.
Confirm that you select the
Appropriate
file for the datastore. Click Open.
After the
vSphere Data Protection Appliance .ova file is selected, click Next.
Review the
template details and click Next.
On the Accept
EULAs screen, read the license agreement, click Accept, and then click Next.
On
the Select name and folder screen, enter the name for the vSphere Data
Protection Appliance (this
must
match the entry configured on the DNS Server) and click on the folder or
datacenter in which you
want
it deployed. The vSphere Data Protection Appliance Name should not be changed
after installation.
Click Next.
On the Select
a resource screen, select the host for the vSphere Data Protection Appliance
and click Next.
On the Select Storage screen, select the virtual disk format and
select the location of the storage for the
vSphere
Data Protection Appliance. Click Next.
Select Host where is free space click next
We have free space on local disk on host 73 select local
disk and click next
Select Thin Provision and next
On
the Setup networks screen, select the Destination Network for the vSphere Data
Protection Appliance
and click Next.
In
the Customize template screen, specify the Default
Gateway, DNS, Network 1 IP Address, and
Network 1 Netmask.
Confirm that the IP addresses are correct and match the entry in the DNS
Server.
Setting
incorrect IP addresses in this dialog box will require the .ova to be
redeployed. Click Next.
On
the Ready to complete screen, confirm that all of the deployment options are
correct. Check Power on
after
deployment and click Finish.
Click on close
Configure
and Install the VDP Appliance
From a web
browser, access the vSphere Web Client.
By default username is changeme
From
the VMware Login screen, enter the following:
a
User: root
b
Password: changeme
c
Click Login
The Welcome
screen appears. Click Next.
The
Network settings dialog box appears. Specify (or confirm) the following:
a
IPv4 Static address
b
Netmask
c
Gateway
d
Primary DNS
e
Secondary DNS
f
Host name
g Domain
Click Next.
The Time Zone
dialog box appears. Select the appropriate time zone and click Next.
The VDP
credentials dialog box displays. change the password
pecify a
password that contains the above
Click Next.
The vCenter
registration dialog box appears. Specify the Above.
Click Test connection
Click Next
Click on create new storage and next
We have already select local disk
Allocated 3 disk to device allocation
Do not change settings of CPU and memory click next
The Ready to
Complete page displays. Click Finish
Configuration
of the vSphere Data Protection Appliance is now complete, but you will need to
return to
the
vSphere Web Client and reboot the appliance. Using the vSphere Web Client,
right click on the
appliance and
select Restart
Guest OS.
In the
Confirm Restart message, click Yes. The reboot can take up to 30 minutes.
After Installation wait 30-40
minuts for starting services of VDP backup
https://192.168.210.26:8543/vdp-configure
- for the starting services
No comments:
Post a Comment